01
Ihe mmetụta mgbapụ Laser
Nkọwa njirimara ngwaahịa
| Ogologo etiti | 400mm 100mm 50mm |
| Oke nha | ± 200mm ± 35mm ± 15mm |
| Ọnụ ọgụgụ zuru oke (FS) | 200-600mm 65-135mm 35-65mm |
| voltaji ọkọnọ | 12...24VDC |
| Ike oriri | ≤960mW |
| Ibu ibu ugbu a | ≤100mA |
| Mbelata voltaji | |
| Isi iyi ọkụ | Laser na-acha uhie uhie (650nm); ọkwa laser: Klas 2 |
| Dayameta doo | Ihe dị ka Φ500μm (na 400mm) |
| Mkpebi | 100μm |
| izi ezi nke ahịrị | ± 0.2% FS ( nha nha 200mm-400mm) ; ± 0.3% FS ( nha nha 400mm-600mm) |
| Tinyegharịa izi ezi | 300μm@200mm-400mm;800μm@400mm(gụnyere) -600mm |
| Mpụta 1 (Nhọrọ ụdị) | Uru dijitalụ: RS-485(Protocol Modbus nkwado) ;Ngbanwe uru:NPN/PNP na NO/NC settable |
| Mpụta 2 (Nhọrọ ụdị) | Analog: 4...20mA (nkwụsị ibu | 300Ω) / 0-5V; Uru mgbanwe: NPN/PNP na NO/NC settable |
| Ntọala anya | RS-485:Kwụsị igodo/RS-485 ntọala;Analog:Ntọala igodo |
| Oge nzaghachi | |
| Akụkụ | 45mm * 27mm * 21mm |
| Ngosipụta | Ngosipụta OLED (Nha: 18*10mm) |
| Okpomọkụ ịkpafu | 0.03% FS/℃ |
| Ihe ngosi | Ihe ngosi laser na-arụ ọrụ: ọkụ na-acha akwụkwọ ndụ na-enwu; Gbanwee ihe ngosi mmepụta: ìhè edo edo |
| sekit nchedo | Nchedo sekit dị mkpụmkpụ, nchebe polarity, nchebe ibufe |
| Ọrụ arụnyere n'ime ya | Adreesị ohu & ntọala ọnụego Baud; Ntọala efu; ajụjụ oke; Nleba anya ngwaahịa; Nhazi mmepụta; Nkuzi ihe n'otu n'otu/ nkuzi isi ihe abụọ / nkuzi isi atọ; Nkuzi windo; Tọgharia data ụlọ ọrụ |
| gburugburu ọrụ | Okpomọkụ ọrụ: -10…+45℃;Okpomọkụ nchekwa:-20…+60℃;Ambient okpomọkụ:35...85% RH(Ọ dịghị condensation) |
| Ihe mgbochi ambient ìhè | Ìhè n'ọkụ:＜3,000lux; nnyonye anya ìhè anyanwụ:≤10,000lux |
| ogo nchekwa | IP65 |
| Ihe onwunwe | Ụlọ: Zinc alloy; Lens: PMMA; Diaplay: Glass |
| Iguzogide ịma jijiji | 10...55Hz Ugboro abụọ amplitude1mm,2H nke ọ bụla na X,Y,Z ntụziaka |
| Mkpali iguzogide | 500m/s² (Ihe dị ka 50G) ugboro 3 ọ bụla na ntụzịaka X,Y,Z |
| Njikọ | eriri ihe mejupụtara 2m (0.2mm²) |
| Ngwa | M4 ịghasa (ogologo: 35mm) x2, aku x2, gasket x2, arịọnụ nkwado, ntuziaka ọrụ |
Ihe ndapụta ngwa nyocha
FAQ
1. Gịnị bụ mmepụta ụdịdị nke laser displacement sensọ?
Ụdị mmepụta ahụ nwere mmepụta analọg, transistor npn, pnp mmepụta, protocol nkwurịta okwu 485.
2. Gịnị bụ ikwughachi ziri ezi nke laser displacement sensọ nchọpụta 30mm ụdị?
Ụdị 30mm nwere ike ikwugharị nke 10μm na nha nha nke ± 5mm. Anyị nwere ụdị 400mm nwere oke nha nke ± 200mm.