Leave Your Message

LX101 Colour-coded sensors series

Product Series: Color Mark sensor   NPN: LX101 N      PNP:LX101P

     Product Specifications

      Model :   PZ-LX101
      Output Type :   NPN Output
      Type :  Single output port, wire-guided
      Control Output :   Single output port
      Light Source :  4-element light-emitting diode (LED) array
      Response Time:  MARK Mode: 50μm     C and C1 Modes: 130μm
      Output Selection :   LIGHT-ON/DARK-ON (switch selection)
      Display Indicator :    Operation Indicator: Red LED
      Dual Digital Monitor:  Dual 7-digit display
     Threshold (4-digit green LED array indicator) and Current Value (4-digit red LED array indicator) light up together, with a current range of 0-9999 
      Detection Method :   Light intensity detection for MARK, automatic color matching detection for C, and color + light value detection for C1
      Delay Function:   Disconnection delay timer/activation delay timer/single shot timer/activation delay single shot timer, selectable. The timer display can be set for a duration of 1ms-9999ms
     Power Supply:   12-24V DC ±10%, ripple ratio (p-p) 10% grade 2
     Operating Environment Brightness:    Incandescent Light: 20,000 lux
      Daylight: 30,000 lux
     Power Consumption:   Standard mode, 300mW, voltage 24V
     Vibration Resistance:  10 to 55Hz, double amplitude: 1.5mm, 2 hours for XYZ axes respectively
     Ambient Temperature:  -10 to 55°C, no freezing

    FAQ

    1. Can this sensor distinguish between two colours, like black and red?
       It can be set to detect black has signal output, red does not output, only for black has signal output, the light is on.

    2. Can the color code sensor locate the black mark on the detection label? Is the response speed fast?
        Aim at the black label you want to identify, press set, and for other colours you don't want to identify, press set again, so that as long as there is a black label passing by, there will be a signal output

    Leave Your Message