01
Laser displacement sensor
Product feature description
Center distance |
400mm 100mm 50mm |
Measuring range |
±200mm ±35mm ±15mm |
Full scale(F.S.) |
200-600mm 65-135mm 35-65mm |
Supply voltage |
12...24VDC |
Consumption power |
≤960mW |
Load current |
≤100mA |
Voltage drop |
<2V |
Light source |
Red laser(650nm);Laser level:Class 2 |
Beam diameter |
About Φ500μm(at 400mm) |
Resolution |
100μm |
Linear accuracy |
±0.2%F.S.(measuring distance 200mm-400mm);±0.3%F.S.(measuring distance 400mm-600mm) |
Repeat accuracy |
300μm@200mm-400mm;800μm@400mm(Include)-600mm |
Output 1(Model selection) |
Digital value:RS-485(Support Modbus protocol);Switch value:NPN/PNP and NO/NC settable |
Output 2(Model selection) |
Analog:4...20mA(Load resistance<300Ω)/0-5V;Switch value:NPN/PNP and NO/NC settable |
Distance setting |
RS-485:Keypress/RS-485 setting;Analog:Keypress setting |
Response time |
<10ms |
Dimension |
45mm*27mm*21mm |
Display |
OLED display(Size:18*10mm) |
Temperature drift |
<0.03%F.S./℃ |
Indicator |
Laser working indicator:green light on;Switch output indicator:yellow light |
Protection circuit |
Short circuit protection,reverse polarity protection, overload protection |
Built-in function |
Slave address & Baud rate settings;Zero setting;Parameter query;Product self-inspection;Output setting;Ingle-point teaching/two-point teaching/three-point teaching;Window teaching;Factory data reset |
Service environment |
Operation temperature:-10…+45℃;Storage temperature:-20…+60℃;Ambient temperature:35...85%RH(No condensation) |
Anti ambient light |
Incandescent light:<3,000lux;Sunlight interference:≤10,000lux |
Protection degre |
IP65 |
Material |
Housing:Zinc alloy;Lens:PMMA;Diaplay:Glass |
Vibration resist |
10...55Hz Double amplitude1mm,2H each in X,Y,Z directions |
Impulse resista |
500m/s²(About 50G)3 times each in X,Y,Z directions |
Connection |
2m Composite cable(0.2mm²) |
Accessory |
M4 screw(length:35mm)x2,nut x2,gasket x2,mounting bracket,operation manual |
Scanner application scenarios



FAQ
1. What are the output modes of the laser displacement sensor?
The output mode has analog output, transistor npn, pnp output, 485 communication protocol
2. What is the repetition accuracy of laser displacement sensor detection 30mm type?
The 30mm model has a repeatability of 10μm and a measuring range of ±5mm. We have a 400mm model with a measuring range of ±200mm.